Aisin TG-81SC

Automatikgetriebe

← Zurück zur Startseite

Übersicht

Das Aisin TG-81SC Getriebe - Komplette Informationen zu Problemen, Fehlercodes und Lösungen.

Erfahren Sie alles über häufige Fehlercodes wie P0700, P0720, P0730, typische Probleme wie Geräusche, Ruckeln oder Schaltprobleme und Wartungshinweise für das Aisin TG-81SC.

The 8-speed automatic transmission Aisin TG-81SC has been produced by the concern since 2013 in three different versions: Light Torque AWF8F35, Medium Torque AWF8F45 or Heavy Duty AWF8G45.

This gearbox is known as BMW GA8F22AW, GM AF50,VW AQ450,Toyota U881or Peugeot AMN8. In 2013, Aisin introduced its first 8-speed automatic transmission for front-wheel drive and all-wheel drive vehicles with a transverse powertrain.

This automatic transmission was offered on models from many manufacturers in three different modifications: Light Torque AWF8F35 for engines up to 350 Nm, Medium Torque AWF8F45 for engines up to 480 Nm, and Heavy Duty AWF8G45 for diesel powertrains with the same torque. This automatic transmission was used by more than a dozen manufacturers and is known under different names: on cars from GM as AF50-8, BMW and Mini as GA8F22AW, Volkswagen as AQ450, Lexus as U881 and on numerous models from the Stellantis concern under its own index AMN8.

Also based on this automatic transmission, a related, but slightly simplified AWF8G30 automatic transmission was created, which was installed on Peugeot-Citroen models as ATN8, on VAG as AQ300-8F, on Toyota as UB80. Using the example of a Lexus RX350 2018 with a 3,5 liter engine: The transmission was installed on: The manufacturer does not regulate oil changes, but we recommend changing it every 60,000 km.

At the factory, 7.6 liters of lubricant are poured, but with a partial replacement, 3.0 to 4.0 liters are drained.

With a complete oil change using the replacement method on a special device, up to 12.5 liters are used.

Initially, it was recommended to use Aisin AW-1 lubricant, and since 2018, Aisin AW-2. This is a reliable gearbox, but in the first years of production it could cause trouble: on the forums you can find complaints about lubricant leaks, jolts and inadequate gear shifts.

But all such problems were usually resolved under warranty and have long been eliminated by dealers. This gearbox is in most ca...

Technische Spezifikationen

Getriebetyp

Automatik

Hersteller

Aisin

Bezeichnung

TG-81SC

Gänge

8

Maximales Drehmoment

up to 580

Ölkapazität

7.2

Produktionszeitraum

since 2013

Gewicht

95

Antriebsart

front / rear

Getriebetyp

Automatik

Hersteller

Aisin

Bezeichnung

TG-81SC

Gänge

8

Maximales Drehmoment

up to 580

Ölkapazität

7.2

Produktionszeitraum

since 2013

Gewicht

95

Antriebsart

front / rear

Getriebetyp

Automatik

Hersteller

Aisin

Bezeichnung

TG-81SC

Gänge

8

Maximales Drehmoment

up to 580

Ölkapazität

7.2

Produktionszeitraum

since 2013

Gewicht

95

Antriebsart

front / rear

Wartung

Für optimale Leistung und Langlebigkeit empfehlen wir:

Diagnose

Moderne Getriebe verfügen über umfassende elektronische Diagnosesysteme. Fehlercodes können über OBD-II oder spezielle Diagnosegeräte ausgelesen werden. Bei Problemen empfehlen wir die Konsultation eines Fachbetriebs.

Wartungsempfehlungen

The manufacturer does not regulate oil changes, but we recommend changing it every 60,000 km. At the factory, 7.6 liters of lubricant are poured, but with a partial replacement, 3.0 to 4.0 liters are drained. With a complete oil change using the replacement method on a special device, up to 12.5 liters are used. Initially, it was recommended to use Aisin AW-1 lubricant, and since 2018, Aisin AW-2.

Wartungsempfehlungen

The manufacturer does not regulate oil changes, but we recommend changing it every 60,000 km. At the factory, 7.6 liters of lubricant are poured, but with a partial replacement, 3.0 to 4.0 liters are drained. With a complete oil change using the replacement method on a special device, up to 12.5 liters are used. Initially, it was recommended to use Aisin AW-1 lubricant, and since 2018, Aisin AW-2.

Wartungsempfehlungen

The manufacturer does not regulate oil changes, but we recommend changing it every 60,000 km. At the factory, 7.6 liters of lubricant are poured, but with a partial replacement, 3.0 to 4.0 liters are drained. With a complete oil change using the replacement method on a special device, up to 12.5 liters are used. Initially, it was recommended to use Aisin AW-1 lubricant, and since 2018, Aisin AW-2.

Wartungsempfehlungen

The manufacturer does not regulate oil changes, but we recommend changing it every 60,000 km. At the factory, 7.6 liters of lubricant are poured, but with a partial replacement, 3.0 to 4.0 liters are drained. With a complete oil change using the replacement method on a special device, up to 12.5 liters are used. Initially, it was recommended to use Aisin AW-1 lubricant, and since 2018, Aisin AW-2.

Aisin TG-81SC - Häufige Fragen und Probleme

Was bedeutet Fehlercode P0700 beim Aisin TG-81SC?

Der Fehlercode P0700 weist auf ein Problem im Getriebesteuerungssystem hin. Bei diesem Code sollte eine professionelle Diagnose durchgeführt werden, um die genaue Ursache zu identifizieren.

Was bedeutet Fehlercode P0720 beim Aisin TG-81SC?

Der Fehlercode P0720 weist auf ein Problem im Getriebesteuerungssystem hin. Bei diesem Code sollte eine professionelle Diagnose durchgeführt werden, um die genaue Ursache zu identifizieren.

Was bedeutet Fehlercode P0730 beim Aisin TG-81SC?

Der Fehlercode P0730 weist auf ein Problem im Getriebesteuerungssystem hin. Bei diesem Code sollte eine professionelle Diagnose durchgeführt werden, um die genaue Ursache zu identifizieren.

Häufige Probleme

1. Aisin TG-Serie Variante

2. Standard-Wartung

3. Ölwechsel wichtig

4. Gute Qualität

Häufige Fehlercodes

Häufig auftretende OBD-II Fehlercodes für dieses Getriebe:

  • P0700 - TCM
  • P0720 - Output Speed
  • P0730 - Incorrect Ratio
  • P0841 - Pressure

Wartungsempfehlungen

The manufacturer does not regulate oil changes, but we recommend changing it every 60,000 km. At the factory, 7.6 liters of lubricant are poured, but with a partial replacement, 3.0 to 4.0 liters are drained. With a complete oil change using the replacement method on a special device, up to 12.5 liters are used. Initially, it was recommended to use Aisin AW-1 lubricant, and since 2018, Aisin AW-2.

Hinweis: Diese Website dient ausschließlich zu Informationszwecken. Alle bereitgestellten Informationen, Daten und Empfehlungen dienen der allgemeinen Information über Getriebetechnologien. Die Website hat keine kommerzielle Nutzung und bietet keine Verkaufs-, Reparatur- oder Serviceleistungen an.